[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Abele, L.
An Ontology-Based Approach for Decentralized Monitoring And Diagnostics [Program→]
Affonso Guedes, L.
Selecting Redundant Nodes When Addressing Availability in Wireless Visual Sensor Networks [Program→]
Akillioglu, H.
Characterization of an Agile Bio-inspired Shop-Floor [Program→]
Albrecht, A.
Simulation model concept for evaluating spare parts supply chain planning methods [Program→]
Amaral, M.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Visualization tool for cyber-physical maintenance systems [Program→]
Andreoli, A.
Development of an Electronic Management System for a Rotary Combustion Engine [Program→]
Antzoulatos, N.
An Agent Based Framework to Support Plug and Produce [Program→]
Ariza, J.
WirelessHART Localization Algorithm [Program→]
Ascorti, L.
Cloud-based WirelessHART networking for Critical Industrial Monitoring and Control [Program→]
Aznar, E.
Low-Cost Radar-Based Target Identification Prototype using an Expert System [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Bangemann, T.
IMC-AESOP Outcomes: Paving the way to Collaborative Manufacturing Systems [Program→]
Barari, A.
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
Barata, D.
The Impact of Cloud Manufacturing on Supply Chain Agility [Program→]
Barata, J.
Exploring reconfiguration alternatives in Self-Organising Evolvable Production Systems through Simulation [Program→]
A survey of Service-based Systems-of-Systems Manufacturing Systems related to Product Life-Cycle Support and Energy Efficiency [Program→]
A network inference tool for JADE-based systems [Program→]
The Impact of Cloud Manufacturing on Supply Chain Agility [Program→]
An Agent Based Framework to Support Plug and Produce [Program→]
Barros, J.
Requirements Specification for Controller Design - from Use Cases to IOPT Net Models [Program→]
Basso, F.
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Bastos-Filho, T.
Comparison Among Feature Extraction Techniques Based on Power Spectrum for a SSVEP-BCI [Program→]
Baumgarten, G.
First Results of Automatic Fault-Injection in an AUTOSAR Tool-chain [Program→]
Becker, L.
Coexistence issues in Wireless Networks for Factory Automation [Program→]
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Becker, L.
RBESP: Reliable and Best Effort Stack Protocol for UAV collaboration with WSN [Program→]
Belyakov, S.
Knowledge-based Routing in Mechanical Transportation Systems [Program→]
Benchaib, A.
Optimal power flow operation of a multi-terminal HVDC system with renewable sources and storages [Program→]
Bhatt, D.
GPS based secure real-time mobile data logger for route analysis and estimation for moving objects [Program→]
Bodanese, J.
RBESP: Reliable and Best Effort Stack Protocol for UAV collaboration with WSN [Program→]
Boldt, F.
Performance Analysis of Extreme Learning Machine for Automatic Diagnosis of Electrical Submersible Pump Conditions [Program→]
Botelho, S.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Visualization tool for cyber-physical maintenance systems [Program→]
Bouffaron, F.
Checking models throughout the iterative co-specification process of a critical system [Program→]
Brandão, D.
Artificial Neural Networks and Signal Clipping for PROFIBUS DP diagnostics [Program→]
Breseghello Zoccal, L.
An Alternative Linear Topology for Conditioning Resistive Sensors [Program→]
Brisolara, L.
Integrating UML, MARTE and SysML to improve requirements specification and traceability in the embedded domain [Program→]
Brito, I.
Requirements Specification for Controller Design - from Use Cases to IOPT Net Models [Program→]
Brusamarello, V.
WirelessHART Localization Algorithm [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Caicedo, E.
Comparison Among Feature Extraction Techniques Based on Power Spectrum for a SSVEP-BCI [Program→]
Caliskanelli, I.
Using Mobile Robotic Agents to Increase Service Availability and Extend Network Lifetime on WSRNs [Program→]
Carelli, R.
Coordinated Path-Following for Multi-Robot Systems Using the Cluster Space Framework Approach [Program→]
Carvalho, F.
Virtual Reality techniques for planning the Offshore Robotizing [Program→]
Castillo, J.
Comparison Among Feature Extraction Techniques Based on Power Spectrum for a SSVEP-BCI [Program→]
Castro, E.
An Agent Based Framework to Support Plug and Produce [Program→]
Castro, R.
Automation Project Framework for Energy Management ISO50001 Compatible [Program→]
Cavalieri, S.
Prognostics algorithms for Low Voltage Circuit Breaker application: a benchmark analysis [Program→]
Device Layer Agents for an Artificial Immune Intelligent Maintenance System [Program→]
Cavin, S.
Multi-Level Skill-Based Allocation Methodology for Evolvable Assembly Systems [Program→]
Chaves, L.
Automation Project Framework for Energy Management ISO50001 Compatible [Program→]
Chi, H.
Appliance Signature with Unsupervised Machine Learning Algorithm for Energy Management [Program→]
Energy efficiency management of PHEVs: Performance analysis of fuzzy logic and genetic algorithm [Program→]
Christensen, J.
Function Block Implementation of Service Oriented Architecture: Case Study [Program→]
Chugo, D.
Motion Design of Service Robot - Study on Human Impression - [Program→]
Chui, K.
Appliance Signature with Unsupervised Machine Learning Algorithm for Energy Management [Program→]
Energy efficiency management of PHEVs: Performance analysis of fuzzy logic and genetic algorithm [Program→]
Chung, H.
Appliance Signature with Unsupervised Machine Learning Algorithm for Energy Management [Program→]
Cilku, B.
Dual-Layer Bus Arbiter for Mixed-Criticality Systems with Hypervisors [Program→]
Coelho, R.
An Algorithm for Rodbeds Ground Resistance Calculation with FEM Validation [Program→]
Colombo, A.
A survey of Service-based Systems-of-Systems Manufacturing Systems related to Product Life-Cycle Support and Energy Efficiency [Program→]
Colombo, A.
IMC-AESOP Outcomes: Paving the way to Collaborative Manufacturing Systems [Program→]
Cordes, A.
Conceptual Approach for Integrating Tactical Spare Parts Inventory Management and Transport Planning [Program→]
Simulation model concept for evaluating spare parts supply chain planning methods [Program→]
Corporaal, H.
A Framework for Automatic Custom Instruction Identification on Multi-Issue ASIPs [Program→]
Correa Ribeiro, M.
A Tool for Response Time and Schedulability Analysis in Modbus Serial Communications [Program→]
Costa, D.
Relevance-based Balanced Sink Mobility in Wireless Visual Sensor Networks [Program→]
Croucamp, P.
Locomotive monitoring system using wireless sensor networks [Program→]
Cunha, P.
Using Colored Petri Nets for the Requirements Engineering of a Surface Electrogastrography System [Program→]
Cury, J.
Integration of supervisory control with SCADA system for a flexible manufacturing cell [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
D. Oliveira, V.
A Service-oriented Approach to Technology Based Industry [Program→]
Dai, W.
Knowledge-based web service integration for industrial automation [Program→]
Dai, W.
Function Block Implementation of Service Oriented Architecture: Case Study [Program→]
Damm, G.
Optimal power flow operation of a multi-terminal HVDC system with renewable sources and storages [Program→]
De Carli Foletto, T.
On the performance of unscented Kalman filter with intermittent observations [Program→]
Dell, J.
Model-based Platform Design and Evaluation of Cloud-based Cyber-Physical Systems (CCPS) [Program→]
Di Orio, G.
The Impact of Cloud Manufacturing on Supply Chain Agility [Program→]
An Agent Based Framework to Support Plug and Produce [Program→]
Dias, A.
Artificial Neural Networks and Signal Clipping for PROFIBUS DP diagnostics [Program→]
Dias Ferreira, J.
A network inference tool for JADE-based systems [Program→]
Dias da Silva, L.
Using Colored Petri Nets for the Requirements Engineering of a Surface Electrogastrography System [Program→]
Dias-Ferreira, J.
Exploring reconfiguration alternatives in Self-Organising Evolvable Production Systems through Simulation [Program→]
Characterization of an Agile Bio-inspired Shop-Floor [Program→]
Dickow, V.
WirelessHART network analyzer with coexistence detection [Program→]
Diedrich, C.
Coupling heterogeneous production systems by a multi-agent based cyber-physical production system [Program→]
Doering, D.
A Model-Based Design Space Exploration for Embedded Image Processing in Industrial Applications [Program→]
A Model Driven Engineering Methodology for Embedded System Designs - HIPAO2 [Program→]
Dorado Navas, F.
Optimal power flow operation of a multi-terminal HVDC system with renewable sources and storages [Program→]
Dreher, H.
Multidimensional Ontology Modelling - a Robust Methodology for Managing Complex and Heterogeneous Petroleum Digital Ecosystems [Program→]
Du, R.
Services Convergence and Multi-Clouds Integration: Requirements, Architecture and Model-based Integration [Program→]
Duarte Filho, N.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Duarte Guaracy, F.
An Alternative Linear Topology for Conditioning Resistive Sensors [Program→]
Dubinin, V.
Function Block Implementation of Service Oriented Architecture: Case Study [Program→]
de Araújo, G.
RBESP: Reliable and Best Effort Stack Protocol for UAV collaboration with WSN [Program→]
de Carvalho Ferreira, L.
An Alternative Linear Topology for Conditioning Resistive Sensors [Program→]
del Foyo, P.
Scheduling Real-Time Systems with Periodic Tasks using a Model-checking Approach [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Eduardo Pereira, C.
A Tool for Response Time and Schedulability Analysis in Modbus Serial Communications [Program→]
Ellevseth, S.
Maximizing Diversity in CPUs [Program→]
Emmendorfer, L.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Endresen, J.
Maximizing Diversity in CPUs [Program→]
Epple, U.
Rule-Based Engineering Using Declarative Graph Database Queries [Program→]
Espindola, D.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Espíndola, D.
Visualization tool for cyber-physical maintenance systems [Program→]
Ezcurra, F.
Low-Cost Radar-Based Target Identification Prototype using an Expert System [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Fasanotti, L.
Prognostics algorithms for Low Voltage Circuit Breaker application: a benchmark analysis [Program→]
Device Layer Agents for an Artificial Immune Intelligent Maintenance System [Program→]
A Distributed Intelligent Maintenance System based on Artificial Immune Approach and Multi-Agent Systems [Program→]
Feldmann, S.
Keeping Requirements and Test Cases Consistent: Towards an Ontology-based Approach [Program→]
Feng, X.
Services Convergence and Multi-Clouds Integration: Requirements, Architecture and Model-based Integration [Program→]
Ferreira, A.
Managing Intelligent Self-Sustained Electrical Micro-Grids [Program→]
Ferreira, L.
Converting Fuzzy Models to Rough Models [Program→]
Fetter Lages, W.
A Backstepping Non-Linear Controller for a Mobile Robot Implemented in ROS [Program→]
Filho, N.
Visualization tool for cyber-physical maintenance systems [Program→]
Fiorese, A.
A Multicriteria Method for Evaluating Risks in Virtual Organizations [Program→]
Floreani, F.
Prognostics algorithms for Low Voltage Circuit Breaker application: a benchmark analysis [Program→]
Franco Moreno, U.
On the performance of unscented Kalman filter with intermittent observations [Program→]
França, F.
A Framework for Automatic Custom Instruction Identification on Multi-Issue ASIPs [Program→]
Frazzon, E.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Simulation model concept for evaluating spare parts supply chain planning methods [Program→]
Visualization tool for cyber-physical maintenance systems [Program→]
Fröhlich, A.
Automatic Execution of Embedded Software Testing and Debugging [Program→]
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Frömel, B.
Dual-Layer Bus Arbiter for Mixed-Criticality Systems with Hypervisors [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
G. Costa, D.
Selecting Redundant Nodes When Addressing Availability in Wireless Visual Sensor Networks [Program→]
Gahr, S.
Implementation of an automated building model generation tool [Program→]
Galassi, M.
Virtual Reality techniques for planning the Offshore Robotizing [Program→]
Galimberti, S.
Cloud-based WirelessHART networking for Critical Industrial Monitoring and Control [Program→]
Gallo, G.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
Garcia, M.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
García-Valls, M.
Extending the verification capabilities of middleware for reliable distributed self-adaptive systems [Program→]
Garrote, L.
An RRT-based Navigation Approach for Mobile Robots and Automated Vehicles [Program→]
Gerwinn, S.
Simulative Evaluation of Contract-based Change Management [Program→]
Gezgin, T.
Evaluation of a State-based Real-Time Scheduling Analysis Technique [Program→]
Giannotti, M.
Active Learning classification and change detection on multispectral images [Program→]
Giussani, M.
Safe Human-Robot Cooperation through Sensor-less Radio Localization [Program→]
Gomes, L.
A Platform Independent Communication support for Distributed Controller Systems modelled by Petri nets [Program→]
Gomes, L.
Requirements Specification for Controller Design - from Use Cases to IOPT Net Models [Program→]
Gomes Vieira, D.
Extreme Learning Machine with initialized hidden weight [Program→]
Gonzalez, L.
Knowledge-based web service integration for industrial automation [Program→]
Gonçalves Jr., H.
Automation Project Framework for Energy Management ISO50001 Compatible [Program→]
Gorecky, D.
Human-Machine-Interaction in the Industry 4.0 Era [Program→]
Gotoh, T.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Greiner, T.
Model-based Platform Design and Evaluation of Cloud-based Cyber-Physical Systems (CCPS) [Program→]
Grimm, S.
An Ontology-Based Approach for Decentralized Monitoring And Diagnostics [Program→]
Extending Statistical Data Quality Improvement with Explicit Domain Models [Program→]
Grüner, S.
Rule-Based Engineering Using Declarative Graph Database Queries [Program→]
Guaracy, F.
Converting Fuzzy Models to Rough Models [Program→]
Guedes, L.
Relevance-based Balanced Sink Mobility in Wireless Visual Sensor Networks [Program→]
Reliability Evaluation of WirelessHART Under Faulty Link Scenarios [Program→]
Göhner, P.
Coupling heterogeneous production systems by a multi-agent based cyber-physical production system [Program→]
Götz, M.
First Results of Automatic Fault-Injection in an AUTOSAR Tool-chain [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Hancke, G.
Wireless Environmental Monitoring System for Smart Buildings [Program→]
GPS based secure real-time mobile data logger for route analysis and estimation for moving objects [Program→]
Hancke, G.
Benchmarking Internet of Things devices [Program→]
Hancke, G.
Implementing the Internet of Things Vision in Industrial Wireless Sensor Networks [Program→]
Harrison, M.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Hashimoto, H.
Verification of Relationship between Heart Rate and Body Movement for Fatigue Estimation [Program→]
Effective destination determination for Semi-Autonomous Smart Electric Wheelchair Based on History of Human Activity [Program→]
Motion Design of Service Robot - Study on Human Impression - [Program→]
Hauer, S.
Implementation of an automated building model generation tool [Program→]
Hellingrath, B.
Conceptual Approach for Integrating Tactical Spare Parts Inventory Management and Transport Planning [Program→]
Simulation model concept for evaluating spare parts supply chain planning methods [Program→]
Henkler, S.
Evaluation of a State-based Real-Time Scheduling Analysis Technique [Program→]
Ho, Y.
A Study for Assistant Robotic System using Motion Capture Method for Adapting to Human-robot Interface [Program→]
Hoeftberger, O.
Runtime Evaluation of Ontology-based Reconfiguration of Distributed Embedded Real-Time Systems [Program→]
Hubauer, T.
Extending Statistical Data Quality Improvement with Explicit Domain Models [Program→]
Hung, F.
Appliance Signature with Unsupervised Machine Learning Algorithm for Energy Management [Program→]
Energy efficiency management of PHEVs: Performance analysis of fuzzy logic and genetic algorithm [Program→]
Hübner, J.
A Multi-Agent System for the Production Control of Printed Circuit Boards using JaCaMo and Prometheus AEOlus [Program→]
Hüttemann, G.
A Multi-Agent System for the Production Control of Printed Circuit Boards using JaCaMo and Prometheus AEOlus [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Iarovyi, S.
Knowledge-based web service integration for industrial automation [Program→]
Ibrir, S.
Iterative learning control schemes for a class of nonlinear systems: Theory and real-time implementation [Program→]
Ierace, S.
Prognostics algorithms for Low Voltage Circuit Breaker application: a benchmark analysis [Program→]
Device Layer Agents for an Artificial Immune Intelligent Maintenance System [Program→]
Imani, J.
Verification of Relationship between Heart Rate and Body Movement for Fatigue Estimation [Program→]
Ioppolo, M.
Safe Human-Robot Cooperation through Sensor-less Radio Localization [Program→]
Israel, E.
Simulation model concept for evaluating spare parts supply chain planning methods [Program→]
Iwao, Y.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Jassbi, J.
The Impact of Cloud Manufacturing on Supply Chain Agility [Program→]
Jess, T.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Jiménez Carrizosa, M.
Optimal power flow operation of a multi-terminal HVDC system with renewable sources and storages [Program→]
Jozwiak, L.
A Framework for Automatic Custom Instruction Identification on Multi-Issue ASIPs [Program→]
Judex, F.
Implementation of an automated building model generation tool [Program→]
Junior, O.
A Multicriteria Method for Evaluating Risks in Virtual Organizations [Program→]
Junqueira, F.
A method to design a manufacturing control system considering flexible reconfiguration [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Kagei, S.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Karnouskos, S.
IMC-AESOP Outcomes: Paving the way to Collaborative Manufacturing Systems [Program→]
Kawabata, K.
Motion Design of Service Robot - Study on Human Impression - [Program→]
Kawakami Harrop Galvão, R.
Actuator Fault Diagnosis and Control of a Quadrotor [Program→]
Khalili, A.
A Conceptual Network-based Intrusion Detection System for Cyber Physical Systems [Program→]
Kleinsteuber, M.
An Ontology-Based Approach for Decentralized Monitoring And Diagnostics [Program→]
Kotte, O.
Cross-domain Methods and Tools for Decision Support Services based on Context Sensitivity Approach [Program→]
Krechel, W.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Krenn, F.
Subject-Oriented Process Design Across Organizational Control Layers [Program→]
Kruger, C.
Implementing the Internet of Things Vision in Industrial Wireless Sensor Networks [Program→]
Benchmarking Internet of Things devices [Program→]
Kruger, C.
Locomotive monitoring system using wireless sensor networks [Program→]
Kumar, A.
Wireless Environmental Monitoring System for Smart Buildings [Program→]
Kunzel, G.
A Tool for Response Time and Schedulability Analysis in Modbus Serial Communications [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Lamnabhi-Lagarrigue, F.
Optimal power flow operation of a multi-terminal HVDC system with renewable sources and storages [Program→]
Lamparter, S.
Extending Statistical Data Quality Improvement with Explicit Domain Models [Program→]
Lange, R.
Probabilistic Scheduling of the FlexRay Dynamic Segment [Program→]
Lau, W.
Energy efficiency management of PHEVs: Performance analysis of fuzzy logic and genetic algorithm [Program→]
Leal, S.
Implementation of an automated building model generation tool [Program→]
Legat, C.
Keeping Requirements and Test Cases Consistent: Towards an Ontology-based Approach [Program→]
MDE of Manufacturing Automation Software - Integrating SysML and Standard Development Tools [Program→]
Leite, M.
Enhancing Automatic Generation of VHDL Descriptions from UML/MARTE Models [Program→]
Leitão, P.
Managing Intelligent Self-Sustained Electrical Micro-Grids [Program→]
Lerm, R.
A Model-Based Design Space Exploration for Embedded Image Processing in Industrial Applications [Program→]
Leão, E.
An Opportunistic Approach to Deal with Real-Time Mesh Communication in Wireless Sensor Networks [Program→]
Li, Q.
Services Convergence and Multi-Clouds Integration: Requirements, Architecture and Model-based Integration [Program→]
Lisboa, A.
Color Feature Selection for Smoke Detection in Videos [Program→]
Lobov, A.
Knowledge-based web service integration for industrial automation [Program→]
Lohse, N.
Multi-Level Skill-Based Allocation Methodology for Evolvable Assembly Systems [Program→]
Loskyll, M.
Human-Machine-Interaction in the Industry 4.0 Era [Program→]
Luo, H.
Services Convergence and Multi-Clouds Integration: Requirements, Architecture and Model-based Integration [Program→]
Líbano, F.
Automation Project Framework for Energy Management ISO50001 Compatible [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Machado, T.
WirelessHART network analyzer with coexistence detection [Program→]
Maffei, A.
Characterization of an Agile Bio-inspired Shop-Floor [Program→]
Maier, A.
Online Passive Learning of Timed Automata for Cyber-Physical Production Systems [Program→]
Maló, P.
A Platform Independent Communication support for Distributed Controller Systems modelled by Petri nets [Program→]
Mantripragada, K.
Active Learning classification and change detection on multispectral images [Program→]
Marange, P.
Checking models throughout the iterative co-specification process of a critical system [Program→]
Marques, M.
Integrating UML, MARTE and SysML to improve requirements specification and traceability in the embedded domain [Program→]
Martinez Lastra, J.
Knowledge-based web service integration for industrial automation [Program→]
Martins, R.
A Smart Home Model Using JaCaMo Framework [Program→]
Martins, T.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
Masinde, M.
IoT Applications that work for the African Continent: Innovation or Adoption? [Program→]
An Assessment of Field Readiness for Wireless Sensor Based Weatherboards- A Calibration Report [Program→]
McFarlane, D.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Meneguzzi, F.
A Smart Home Model Using JaCaMo Framework [Program→]
Miranda, G.
Color Feature Selection for Smoke Detection in Videos [Program→]
Mirandola, R.
Extending the verification capabilities of middleware for reliable distributed self-adaptive systems [Program→]
Miyagi, P.
A method to design a manufacturing control system considering flexible reconfiguration [Program→]
Montez, C.
Quality of Service Provision Assessment for DDBP Approach in IEEE 802.15.4 Networks [Program→]
Montez, C.
An Opportunistic Approach to Deal with Real-Time Mesh Communication in Wireless Sensor Networks [Program→]
Moraes, R.
Quality of Service Provision Assessment for DDBP Approach in IEEE 802.15.4 Networks [Program→]
Morel, G.
Checking models throughout the iterative co-specification process of a critical system [Program→]
Moreno González, F.
Low-Cost Radar-Based Target Identification Prototype using an Expert System [Program→]
Mossin, E.
Artificial Neural Networks and Signal Clipping for PROFIBUS DP diagnostics [Program→]
Moura, C.
A network inference tool for JADE-based systems [Program→]
Muller, I.
WirelessHART Localization Algorithm [Program→]
WirelessHART network analyzer with coexistence detection [Program→]
Coexistence issues in Wireless Networks for Factory Automation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Nagorny, K.
A survey of Service-based Systems-of-Systems Manufacturing Systems related to Product Life-Cycle Support and Energy Efficiency [Program→]
Nakamura, H.
Verification of Relationship between Heart Rate and Body Movement for Fatigue Estimation [Program→]
Nascimento, C.
Color Feature Selection for Smoke Detection in Videos [Program→]
Nedjah, N.
A Framework for Automatic Custom Instruction Identification on Multi-Issue ASIPs [Program→]
Nery, A.
A Framework for Automatic Custom Instruction Identification on Multi-Issue ASIPs [Program→]
Netto, J.
WirelessHART Localization Algorithm [Program→]
WirelessHART network analyzer with coexistence detection [Program→]
Coexistence issues in Wireless Networks for Factory Automation [Program→]
Neubauer, M.
Subject-Oriented Process Design Across Organizational Control Layers [Program→]
Neves, P.
Exploring reconfiguration alternatives in Self-Organising Evolvable Production Systems through Simulation [Program→]
Characterization of an Agile Bio-inspired Shop-Floor [Program→]
Nicks, E.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Niitsuma, M.
Effective destination determination for Semi-Autonomous Smart Electric Wheelchair Based on History of Human Activity [Program→]
Nimmagadda, S.
Multidimensional Ontology Modelling - a Robust Methodology for Managing Complex and Heterogeneous Petroleum Digital Ecosystems [Program→]
Nobre, M.
Reliability Evaluation of WirelessHART Under Faulty Link Scenarios [Program→]
Nogar, N.
Low-Cost Radar-Based Target Identification Prototype using an Expert System [Program→]
Nunes, U.
An RRT-based Navigation Approach for Mobile Robots and Automated Vehicles [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Obermaisser, R.
Secure Automotive Gateway - Secure Communication for Future Cars [Program→]
Runtime Evaluation of Ontology-based Reconfiguration of Distributed Embedded Real-Time Systems [Program→]
Model-Based Development of Systems-of-Systems with Real-Time Requirements [Program→]
Oertel, M.
First Results of Automatic Fault-Injection in an AUTOSAR Tool-chain [Program→]
Oertel, M.
Simulative Evaluation of Contract-based Change Management [Program→]
Ohyama, Y.
Verification of Relationship between Heart Rate and Body Movement for Fatigue Estimation [Program→]
Oliveira e Silva, F.
An Alternative Linear Topology for Conditioning Resistive Sensors [Program→]
Olivera, A.
Scheduling Real-Time Systems with Periodic Tasks using a Model-checking Approach [Program→]
Onori, M.
Exploring reconfiguration alternatives in Self-Organising Evolvable Production Systems through Simulation [Program→]
Characterization of an Agile Bio-inspired Shop-Floor [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Pang, C.
A Study on Tool Support for IEC 61499 2nd Edition [Program→]
Pang, C.
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
Pantförder, D.
Coupling heterogeneous production systems by a multi-agent based cyber-physical production system [Program→]
Patil, S.
A Study on Tool Support for IEC 61499 2nd Edition [Program→]
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
Paulon, A.
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Paulon, A.
Wireless Sensor Network UML Profile to Support Model-Driven Development [Program→]
Pedrocchi, N.
Safe Human-Robot Cooperation through Sensor-less Radio Localization [Program→]
Penna, R.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Pereira, C.
WirelessHART Localization Algorithm [Program→]
Pereira, C.
A Model-Based Design Space Exploration for Embedded Image Processing in Industrial Applications [Program→]
Automation Project Framework for Energy Management ISO50001 Compatible [Program→]
Including Operator's Skill and Environment Conditions in an IMS [Program→]
WirelessHART network analyzer with coexistence detection [Program→]
Coexistence issues in Wireless Networks for Factory Automation [Program→]
Device Layer Agents for an Artificial Immune Intelligent Maintenance System [Program→]
Visualization tool for cyber-physical maintenance systems [Program→]
Coexistence Aware for WirelessHART networks [Program→]
A Model Driven Engineering Methodology for Embedded System Designs - HIPAO2 [Program→]
Pereira, C.
Development of an Electronic Management System for a Rotary Combustion Engine [Program→]
Perez-Palacin, D.
Extending the verification capabilities of middleware for reliable distributed self-adaptive systems [Program→]
Perkusich, A.
Using Colored Petri Nets for the Requirements Engineering of a Surface Electrogastrography System [Program→]
Pfeifer, T.
A Multi-Agent System for the Production Control of Printed Circuit Boards using JaCaMo and Prometheus AEOlus [Program→]
Pinheiro, C.
Converting Fuzzy Models to Rough Models [Program→]
Pires, D.
Fuzzy Digital PID Controller Design Based on Robust Stability Criteria [Program→]
Plessis, R.
Wireless Environmental Monitoring System for Smart Buildings [Program→]
Pontes, R.
An Algorithm for Rodbeds Ground Resistance Calculation with FEM Validation [Program→]
Portilla Constain, N.
Integration of supervisory control with SCADA system for a flexible manufacturing cell [Program→]
Portugal, P.
Relevance-based Balanced Sink Mobility in Wireless Visual Sensor Networks [Program→]
Selecting Redundant Nodes When Addressing Availability in Wireless Visual Sensor Networks [Program→]
Quality of Service Provision Assessment for DDBP Approach in IEEE 802.15.4 Networks [Program→]
An Opportunistic Approach to Deal with Real-Time Mesh Communication in Wireless Sensor Networks [Program→]
Evaluating the Impact of Uncontrolled Traffic Sources upon Real-Time Communication in IEEE 802.11s Mesh Networks [Program→]
Premebida, C.
An RRT-based Navigation Approach for Mobile Robots and Automated Vehicles [Program→]
Puschner, P.
Dual-Layer Bus Arbiter for Mixed-Criticality Systems with Hypervisors [Program→]
Pérez Daza, D.
Low-Cost Radar-Based Target Identification Prototype using an Expert System [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Queiroz, F.
Color Feature Selection for Smoke Detection in Videos [Program→]
Queiroz, M.
Integration of supervisory control with SCADA system for a flexible manufacturing cell [Program→]
Quintanilha, J.
Active Learning classification and change detection on multispectral images [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Raffo, G.
RBESP: Reliable and Best Effort Stack Protocol for UAV collaboration with WSN [Program→]
Ramis, B.
Knowledge-based web service integration for industrial automation [Program→]
Ramlal, C.
Iterative learning control schemes for a class of nonlinear systems: Theory and real-time implementation [Program→]
Rampa, V.
Safe Human-Robot Cooperation through Sensor-less Radio Localization [Program→]
Raposo, A.
Virtual Reality techniques for planning the Offshore Robotizing [Program→]
Ratchev, S.
An Agent Based Framework to Support Plug and Produce [Program→]
Rauber, T.
Performance Analysis of Extreme Learning Machine for Automatic Diagnosis of Electrical Submersible Pump Conditions [Program→]
Rech, R.
A Model-Based Design Space Exploration for Embedded Image Processing in Industrial Applications [Program→]
Regal da Silva, T.
Device Layer Agents for an Artificial Immune Intelligent Maintenance System [Program→]
Reichenbach, F.
Maximizing Diversity in CPUs [Program→]
Resende, C.
Coordinated Path-Following for Multi-Robot Systems Using the Cluster Space Framework Approach [Program→]
Rettberg, A.
Simulative Evaluation of Contract-based Change Management [Program→]
First Results of Automatic Fault-Injection in an AUTOSAR Tool-chain [Program→]
Rettberg, A.
A Model-Based Design Space Exploration for Embedded Image Processing in Industrial Applications [Program→]
A Model Driven Engineering Methodology for Embedded System Designs - HIPAO2 [Program→]
Rettberg, A.
Evaluation of a State-based Real-Time Scheduling Analysis Technique [Program→]
Rezende Saldanha, R.
Extreme Learning Machine with initialized hidden weight [Program→]
Ribeiro, L.
Exploring reconfiguration alternatives in Self-Organising Evolvable Production Systems through Simulation [Program→]
Characterization of an Agile Bio-inspired Shop-Floor [Program→]
A network inference tool for JADE-based systems [Program→]
An Agent Based Framework to Support Plug and Produce [Program→]
Ribeiro, M.
Performance Analysis of Extreme Learning Machine for Automatic Diagnosis of Electrical Submersible Pump Conditions [Program→]
Rimer, S.
Locomotive monitoring system using wireless sensor networks [Program→]
Rocha, A.
An Agent Based Framework to Support Plug and Produce [Program→]
Roloff, M.
A Multi-Agent System for the Production Control of Printed Circuit Boards using JaCaMo and Prometheus AEOlus [Program→]
Rosenstiel, W.
Model-based Platform Design and Evaluation of Cloud-based Cyber-Physical Systems (CCPS) [Program→]
Roshchin, M.
Extending Statistical Data Quality Improvement with Explicit Domain Models [Program→]
Rösch, S.
Keeping Requirements and Test Cases Consistent: Towards an Ontology-based Approach [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
S. Dutra, D.
A Service-oriented Approach to Technology Based Industry [Program→]
Saalmann, P.
Simulation model concept for evaluating spare parts supply chain planning methods [Program→]
Sami, A.
A Conceptual Network-based Intrusion Detection System for Cyber Physical Systems [Program→]
Sanduka, I.
Model-Based Development of Systems-of-Systems with Real-Time Requirements [Program→]
Santos, I.
Virtual Reality techniques for planning the Offshore Robotizing [Program→]
Santos, R.
Visualization tool for cyber-physical maintenance systems [Program→]
Santos Filho, D.
A method to design a manufacturing control system considering flexible reconfiguration [Program→]
Sarcinelli, M.
Coordinated Path-Following for Multi-Robot Systems Using the Cluster Space Framework Approach [Program→]
Savazzi, S.
Safe Human-Robot Cooperation through Sensor-less Radio Localization [Program→]
Cloud-based WirelessHART networking for Critical Industrial Monitoring and Control [Program→]
Coexistence issues in Wireless Networks for Factory Automation [Program→]
Savelyeva, M.
Knowledge-based Routing in Mechanical Transportation Systems [Program→]
Schmitt, M.
Human-Machine-Interaction in the Industry 4.0 Era [Program→]
Schmitt, R.
A Multi-Agent System for the Production Control of Printed Circuit Boards using JaCaMo and Prometheus AEOlus [Program→]
Scholze, S.
Cross-domain Methods and Tools for Decision Support Services based on Context Sensitivity Approach [Program→]
Engineering Methods and Tools for Collaborative Development of Industrial Cyber-Physical Based Products and Services [Program→]
Schuetz, D.
Integration of Distributed Hybrid Multi-Agent Systems into an Industrial IT Environment [Program→]
Schuttle, J.
GPS based secure real-time mobile data logger for route analysis and estimation for moving objects [Program→]
Schütz, D.
MDE of Manufacturing Automation Software - Integrating SysML and Standard Development Tools [Program→]
Scrimieri, D.
An Agent Based Framework to Support Plug and Produce [Program→]
Seifert, S.
Secure Automotive Gateway - Secure Communication for Future Cars [Program→]
Semprebom, T.
Quality of Service Provision Assessment for DDBP Approach in IEEE 802.15.4 Networks [Program→]
Serra, G.
Fuzzy Digital PID Controller Design Based on Robust Stability Criteria [Program→]
Sestito, G.
Artificial Neural Networks and Signal Clipping for PROFIBUS DP diagnostics [Program→]
Shah, A.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Shalyto, A.
A Study on Tool Support for IEC 61499 2nd Edition [Program→]
Shalyto, A.
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
She, J.
Verification of Relationship between Heart Rate and Body Movement for Fatigue Estimation [Program→]
Siegert, E.
Integrating UML, MARTE and SysML to improve requirements specification and traceability in the embedded domain [Program→]
Silva, E.
A Platform Independent Communication support for Distributed Controller Systems modelled by Petri nets [Program→]
Silva, I.
Reliability Evaluation of WirelessHART Under Faulty Link Scenarios [Program→]
Selecting Redundant Nodes When Addressing Availability in Wireless Visual Sensor Networks [Program→]
Silva, J.
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Silva, J.
Scheduling Real-Time Systems with Periodic Tasks using a Model-checking Approach [Program→]
A Service-oriented Approach to Technology Based Industry [Program→]
Silva, M.
An RRT-based Navigation Approach for Mobile Robots and Automated Vehicles [Program→]
Silva, R.
A method to design a manufacturing control system considering flexible reconfiguration [Program→]
Silva de Oliveira, R.
Probabilistic Scheduling of the FlexRay Dynamic Segment [Program→]
Soares Indrusiak, L.
Predictability Enhancement in Non-preemptive NoCs using Selective Packet Splitting [Program→]
Soares Indrusiak, L.
Using Mobile Robotic Agents to Increase Service Availability and Extend Network Lifetime on WSRNs [Program→]
Sobrinho, .
Using Colored Petri Nets for the Requirements Engineering of a Surface Electrogastrography System [Program→]
Biomedical Signal Acquisition Systems: Towards a Hybrid Methodology for Certification-Based Development [Program→]
Soldi, R.
Automatic Execution of Embedded Software Testing and Debugging [Program→]
Solomakhina, N.
Extending Statistical Data Quality Improvement with Explicit Domain Models [Program→]
Souza Cândido, A.
Actuator Fault Diagnosis and Control of a Quadrotor [Program→]
Stary, C.
Subject-Oriented Process Design Across Organizational Control Layers [Program→]
Stein, F.
Development of an Electronic Management System for a Rotary Combustion Engine [Program→]
Stemmer, M.
A Multi-Agent System for the Production Control of Printed Circuit Boards using JaCaMo and Prometheus AEOlus [Program→]
Stierand, I.
Evaluation of a State-based Real-Time Scheduling Analysis Technique [Program→]
Stokic, D.
Cross-domain Methods and Tools for Decision Support Services based on Context Sensitivity Approach [Program→]
Engineering Methods and Tools for Collaborative Development of Industrial Cyber-Physical Based Products and Services [Program→]
Sudev, B.
Predictability Enhancement in Non-preemptive NoCs using Selective Packet Splitting [Program→]
sato-Shimokawara, E.
A Study for Assistant Robotic System using Motion Capture Method for Adapting to Human-robot Interface [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
T. T. Barros, T.
A Backstepping Non-Linear Controller for a Mobile Robot Implemented in ROS [Program→]
Tagawa, N.
A Study for Assistant Robotic System using Motion Capture Method for Adapting to Human-robot Interface [Program→]
Takimoto, A.
Effective destination determination for Semi-Autonomous Smart Electric Wheelchair Based on History of Human Activity [Program→]
Takimoto, R.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
Tavares, L.
Extreme Learning Machine with initialized hidden weight [Program→]
Terkaj, W.
Ontology-based Modeling of Production Systems for Design and Performance Evaluation [Program→]
Tiba, H.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Tiba, H.
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
Tibola, L.
A Proposal of Engineering Education Architecture: Improve engineer's competencies through practice labs and 3D Virtual Worlds. Leandro Rosniak Tibola - UFRGS - Brazil [Program→]
Toledo, P.
Artificial Neural Networks and Signal Clipping for PROFIBUS DP diagnostics [Program→]
Tomasini, M.
Prognostics algorithms for Low Voltage Circuit Breaker application: a benchmark analysis [Program→]
Tsang, K.
Appliance Signature with Unsupervised Machine Learning Algorithm for Energy Management [Program→]
Energy efficiency management of PHEVs: Performance analysis of fuzzy logic and genetic algorithm [Program→]
Tsuzuki, M.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Algorithmic Iterative Sampling in Coordinate Metrology Plan for Coordinate Metrology Using Dynamic Uncertainty Analysis [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Ueda, E.
Mesh Generation for Surfaces with Distinct Boundary Segmentation [Program→]
Ulewicz, S.
Integration of Distributed Hybrid Multi-Agent Systems into an Industrial IT Environment [Program→]
Urgo, M.
Ontology-based Modeling of Production Systems for Design and Performance Evaluation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Varejão, F.
Performance Analysis of Extreme Learning Machine for Automatic Diagnosis of Electrical Submersible Pump Conditions [Program→]
Vasconcellos, C.
Enhancing Automatic Generation of VHDL Descriptions from UML/MARTE Models [Program→]
Vasques, F.
Relevance-based Balanced Sink Mobility in Wireless Visual Sensor Networks [Program→]
Selecting Redundant Nodes When Addressing Availability in Wireless Visual Sensor Networks [Program→]
Quality of Service Provision Assessment for DDBP Approach in IEEE 802.15.4 Networks [Program→]
An Opportunistic Approach to Deal with Real-Time Mesh Communication in Wireless Sensor Networks [Program→]
Evaluating the Impact of Uncontrolled Traffic Sources upon Real-Time Communication in IEEE 802.11s Mesh Networks [Program→]
Ventura, R.
Including Operator's Skill and Environment Conditions in an IMS [Program→]
Vicentini, F.
Safe Human-Robot Cooperation through Sensor-less Radio Localization [Program→]
Viegas, C.
Evaluating the Impact of Uncontrolled Traffic Sources upon Real-Time Communication in IEEE 802.11s Mesh Networks [Program→]
Vieira, D.
Color Feature Selection for Smoke Detection in Videos [Program→]
Vieira, R.
A Multicriteria Method for Evaluating Risks in Virtual Organizations [Program→]
Villaverde San José, M.
Low-Cost Radar-Based Target Identification Prototype using an Expert System [Program→]
Vogel-Heuser, B.
Coupling heterogeneous production systems by a multi-agent based cyber-physical production system [Program→]
Integration of Distributed Hybrid Multi-Agent Systems into an Industrial IT Environment [Program→]
Keeping Requirements and Test Cases Consistent: Towards an Ontology-based Approach [Program→]
MDE of Manufacturing Automation Software - Integrating SysML and Standard Development Tools [Program→]
Vogelaar, R.
Shape Reconstruction from Multiple RGB-D Point Cloud Registration [Program→]
Vrba, P.
Managing Intelligent Self-Sustained Electrical Micro-Grids [Program→]
Vyatkin, V.
Knowledge-based Routing in Mechanical Transportation Systems [Program→]
Function Block Implementation of Service Oriented Architecture: Case Study [Program→]
Vyatkin, V.
A Study on Tool Support for IEC 61499 2nd Edition [Program→]
Knowledge-based web service integration for industrial automation [Program→]
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Wada, K.
A Study for Assistant Robotic System using Motion Capture Method for Adapting to Human-robot Interface [Program→]
Weber, P.
Rule-Based Engineering Using Declarative Graph Database Queries [Program→]
Wehrmeister, M.
Enhancing Automatic Generation of VHDL Descriptions from UML/MARTE Models [Program→]
Winter, J.
WirelessHART Localization Algorithm [Program→]
WirelessHART network analyzer with coexistence detection [Program→]
Coexistence issues in Wireless Networks for Factory Automation [Program→]
Coexistence Aware for WirelessHART networks [Program→]
Woodall, P.
A Framework for Detecting Unnecessary Industrial Data in ETL Processes [Program→]
Wu, M.
Verification of Relationship between Heart Rate and Body Movement for Fatigue Estimation [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Xie, P.
Services Convergence and Multi-Clouds Integration: Requirements, Architecture and Model-based Integration [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Yamaguchi, T.
A Study for Assistant Robotic System using Motion Capture Method for Adapting to Human-robot Interface [Program→]
Yan, J.
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
Yan, J.
Knowledge-based Routing in Mechanical Transportation Systems [Program→]
Yang, C.
A Study on Tool Support for IEC 61499 2nd Edition [Program→]
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
Yokota, S.
Motion Design of Service Robot - Study on Human Impression - [Program→]
Yoneyama, T.
Actuator Fault Diagnosis and Control of a Quadrotor [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]
Zhabelova, G.
Cyber-Physical Components for Heterogeneous Modeling, Validation and Implementation of Smart Grid Intelligence [Program→]
Zhang, X.
Prediction of Cutting Forces in Five-axis Ball-end Milling [Program→]
Zillner, S.
An Ontology-Based Approach for Decentralized Monitoring And Diagnostics [Program→]
Zuccolotto, M.
Visualization tool for cyber-physical maintenance systems [Program→]
Zuccolotto, M.
Device Layer Agents for an Artificial Immune Intelligent Maintenance System [Program→]
Artificial Immune Intelligent Maintenance System [Program→]
Zühlke, D.
Human-Machine-Interaction in the Industry 4.0 Era [Program→]
[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]